Bromar Sheep Lickfeeder

The original 3-way restriction system since 1994

The Bromar Sheep Lickfeeder has a unique design and a superior licking action.

One of the key components of the Lickfeeder is the plastic inserts consisting of 11 holes on either side of the feeder. Sheep lick the grain out of these holes, remembering that the grain must be licked upwards to use the saliva on their tongues to get it out.

The feed area is easily adjusted by moving the metal covers above the plastic inserts in or out to either open up or close down the feed area.

The Simplest System on the Market

Includes a 3-Way Restriction feeding system.

First restriction - individual holes.
Second restriction - up and down movement.
Third restriction - holes open sideways as slide is adjusted.

One single easy adjustment.

No grain pressure on the adjustment slide.
Plastic insert can also be moved for further adjustment.
Fully galvanised.
Two cubic metres.

Lamb Friendly.

When the Bromar feeder is closed down to a fine rate the grain is right at the top of the hole.
Our grain is right at the top, enabling lambs and ewe’s to access the grain.
If lambs can access grain at an early age it stimulates the rumen and enables significant weight gain.

Two cubic metres (approx. 50 head per feeder).

1. Undo the three nuts and remove the nut/washer and gal slide.
2. Loosen the second nut on the red plastic insert.
3. Adjust the red plastic insert to the feed rate you require.
4. Tighten the nuts.
5. Replace the gal slide, washers and nuts.
6. Position the gal slide to the feed rate you require.
7. Tighten the nuts.
NB: Make sure bolts are clean to achieve correct tension.

1. Loosen the three nuts.
2. Move the gal slide to the feed rate.
3. Retighten nuts.
If moving with grain:
- Must be less than (1/2) full.
- When empty, must put a pallet on forks.
- Place forks under the feeder - not the legs.