Skip to Content

Bromar Weaner Cattle Lickfeeder

Uniquely designed for superior licking action


The Bromar Weaner Cattle Lickfeeder has a highly unique design and a superior licking action.


One of the key components of the Lickfeeder is the plastic inserts consisting of 11 holes on either side of the feeder. Cattle lick the grain out of these holes, remembering that the grain must be licked upwards to use the saliva on their tongues to get it out.


The feed area is easily adjusted by moving the metal covers above the plastic inserts in or out to either open up or close down the feed area.

The best weaner cattle feeder on the market

Engineered by farmers, our Weaner Cattle Lickfeeder minimises grain loss and promotes healthy weight gain.

Key product features
  • Minimum grain loss
  • Fully galvanised
  • Supplement feeding cattle
  • Ideal for fattening stock
  • Easy to adjust, double-action feed rate
  • No grain pressure on adjustment slides
What makes it different to other weaner cattle lickfeeders?

When the dual action cover above the plastic inserts is slid out the holes close sideways therefore reducing the hole to a size so small that cattle rely on a wet tongue for the grain to stick to. After 5-10 minutes their tongues become dry from licking and they go out to graze, stopping them from eating until the feeder is empty.


Weather protection on the Bromar Lickfeeder is superior to any other as the wing is wide and the Licking area tucked underneath. If driving rain goes into the feed area it drains back into the catching trough and runs out the end. Excess saliva also works its way down and out in the same way.

Note. The Weaner Cattle Lickfeeder is for grown cows and weaner cattle - It is not a bull feeder.

Capacity


Two cubic metres.

To adjust the feed rate - gal slide


  1. Loosen the three nuts.
  2. Move the gal slide to the feed rate.
  3. Retighten nuts.

How to adjust the red plastic insert


  1. Undo the three nuts and remove the nut/washer and gal slide.
  2. Loosen the second nut on the red plastic insert.
  3. Adjust the red plastic insert to the feed rate you require.
  4. Tighten the nuts.
  5. Replace the gal slide, washers and nuts.
  6. Position the gal slide to the feed rate you require.
  7. Tighten the nuts.


Note. Make sure bolts are clean to achieve correct tension.

Our Weaner Cattle Lickfeeder is weather protected with its wide winged sides, keeping your grain dry and cattle well-fed.

Contact us today to order your Bromar Weaner Cattle Lickfeeder.

Our Stockists

Find our products at these stockists throughout Australia or drop in and visit us here in Grenfell.

View All Stockists & Location Map